|
TT1000 Crimp Force Analyser
The TT 1000 Crimp Force Analyser is an on-line quality control system that checks and evaluates the force applied at any given crimping, identifying the crimpings that do not respect the parameters set by the operator. Easy and quick to be set up and... |
|
SMST Crimp Pull Test Gauge
It is used to measure the force - expressed in Newton - needed to pull a terminal off a crimped wire. The pulling speed can be set beetween 15 and 120mm/minute. The instrument has a serial communications port. Every SMST is tuned in our laboratory fo... |
|
SC11 Stripper-Crimper
The SC11 Stripper-Crimper is a wire-stripping unit conceived to be integrated with a crimping station (press and applicator). In one smooth movement, the SC11 grabs the wire, strips it and moves it over to the applicator’s anvil, where it will be cri... |
|
SC12 Stripper-Crimper
The SC12 Stripper-Crimper is a wire-stripping unit conceived to be integrated with a crimping station (press and applicator) and specifically designed to handle closed-barrel terminals. In one smooth movement, the SC12 grabs the wire, strips it and m... |
|
SC14 Stripper-Crimper
Lo scalzatore SC14 è azionato da un sistema completamente pneumatico, utilizzato per scalzare e separare cavi di tipo BIPOLARI. Attrezzatura da banco, non puo' essere associato o combinato con altre macchine per applicazioni automatiche e semiautomat... |
|
SC19 Stripper-Crimper
L' SC19 è uno scalzatore in linea con l'asse di aggraffatura (senza transfer per il cavo) ed è azionato da un sistema elettropneumatico. Puo' essere impiegato con miniapplicatori frontali (per terminali concatenati avvolti su bobina) e laterali (per ... |
|
Shut Height Gauge STP
It is employed to set the crimping press at the correct-height of 135,8 +/- 0,02mm, measured while the press ram is at its Bottom Dead Center. The press crimping height is set as the STP is under load (850Kg), in order to exactly reproduce the press ... |
|
Carrier Strip Cutter TBP
Cutting the carrier strip while crimping (both semi-automatically with a bench-top press fitted with an SC11 stripper crimper or automatically with a cut and strip machine) is not suggested, as the consequent production of off-cuts would put the whol... |
|
Carrier Strip Cutter TBPR
Cutting the carrier strip while crimping (both semi-automatically with a bench-top press fitted with an SC11 stripper crimper or automatically with a cut and strip machine) is not suggested, as the consequent production of off-cuts would put the whol... |
